Bearhawk LSA Parts For Sale by Bearhawk Aircraft

Bearhawk Aircraft has been manufacturing kits and parts for the Bearhawk since 2001. In 2009, we started manufacturing kits & parts for the Patrol. In 2013 Bearhawk Aircraft starting making kits and parts for Bob Barrows newest design – the Bearhawk LSA. All parts manufactured by Bearhawk Aircraft are made under the supervision and authorization of Bob Barrows, design engineer of the Bearhawk & Patrol.

FOR INFORMATION ON PRICE AND AVAILABILITY
CALL 1-877-528-4776 OR EMAIL info@bearhawkaircraft.com
(from Alaska, call 512/626-7886)

LSA WING & FUSELAGE PARTS
Bearhawk Aircraft is now making Quick Build kits as well as parts for Bob Barrows newest two place tandem airplane - the Bearhawk LSA. These are sold in packages of all the parts required for one LSA as shown on individual pages of the plans.

All parts are made to order. These parts can be purchased painted, or furnished without primer or paint.

Trucks come from our factory every 3 to 4 months. So please give us as much lead time as possible so you are not delayed on your project while waiting for parts.

The parts prices and packing/shipping charges are listed separately. If you use PayPal, the packing/shipping prices will be automatically added. For questions, email us at: parts@bearhawkaircraft.com, or send us a letter to:

Bearhawk Aircraft  
P.O. Box 9018
Austin, TX 78766

Plans page #8 parts - includes:
Aileron support frames (2 pieces)
Aileron bellcranks (2 pieces)
Aileron pushrods (2 pieces)

Plans page #8 - Parts painted
Price: $474.88 ($25 S&H)

Plans page #8 - unpainted parts
Price: $432.48 ($25 S&H)



Plans page #11 parts - includes:
Aileron hinge mounts (4 pieces)
Aileron hinges (8 pieces)

Plans page #11 Price: parts painted $328.60 ($25 S&H)

price unpainted parts $302.10 ($25 S&H)



Plans page #12
- includes page #12 parts:
Aileron cable pulley brackets (2 pieces)
Wing strut attach fitting (4 pieces)
Fairlead mounts at wing root (2 pieces)

Plans page # 12: parts painted $259.70 ($20 S&H)


Plans page # 12: parts unpainted $233.20 ($20 S&H)




Plans page #13 parts - includes:
Aluminum wing strut ends (4 pieces)

Plans page # 13: $153.70 ($5.80 S&H)




Plans page #19 parts
- includes:
Horstabs (2 pieces)
Elevators (2 pieces)
Trim Horns (2 pieces)
Trim Pushrods (2 pieces)
Trim Shafts (2 pieces)


Plans page # 19: parts painted $885.10 ($90 S&H)


Plans page # 19: parts unpainted $832.10 ($90 S&H)

Plans page #20 parts
Rudder (1 piece)
Tail Wire Ends (6 pieces)

Plans page #20: parts painted $381.60 ($20 S&H)


Plans page #20: parts unpainted $339.20 ($20 S&H)

Plans #21 parts
Hor Stab Ribs (10 pieces)
Vert Stab Ribs (3 pieces)
Elevator Ribs (8 pieces)
Rudder Ribs (4 pieces)

Price $408.10 + $30 s+h

 

Plans #22 - Trim handle only (1 piece)

Price (painted) $121.90 + $15 s+h

Price (unpainted) $111.30 + $15 s+h

 
Plans #23 parts
Landing Gear as set up for Matco Wheels/Brakes– one right one left. Right side comes with step but the step can be eliminated to save weight.

Price (painted) $810.90 + $45 s+h

Price (unpainted) $736.70 + $45 s+h

Plans #25 parts
Shock Struts (2 pieces)
Pistons with welded shaft (2 pieces)
Bronze top caps (2 pieces)
O-ring/Snap ring set (1 piece)

Price (painted) $731.40 + $30 s+h

Price (unpainted) $689 + $30 s+h

 
Plans #26 parts
Control Sticks (2 pieces - 1F + 1R)
Idler Arm (1 piece)
Interconnect tube (1 piece)
1-1/4" Torque Tube (1 piece)
Push/Pull tube to idler arm (1 piece)
Does not include long push/pull tube to elevator.

Price (painted) $519.40 + $45 s+h


Price (unpainted) $477 + $45 s+h


Plans #27 parts
Front Rudder Pedals (2 pieces)
Brake Pedals (2 pieces)
Rear Pedals (2 pieces)
Links for Front Pedals (4 pieces)
Links for Rear Pedals (4 pieces)
Small 4130 Bushings (4 pieces)

Price (painted) $270.30 + $22.50 s+h


Price (unpainted) $238.50 + $22.50 s+h


Plans #28 parts
Front Seat (1 piece)
Rear Seat (2 piece)
Small attach fitting (6 pieces)

Price (painted) $408.10 + $60 s+h


Price (unpainted) $371 + $60 s+h



Windshields

  

Windshield - Patrol (minor or no trimming required) 1/8" thick

Note: All windshields are drop shipped directly from LPAero Plastics. Shipping and handling are normally $130 - $180

Note 2: For information about the new UVB blocking windshields - download this pdf.


p/n LP-1667CL Clear - $388.00


p/n LP-1667GT green tint - $465.00

p/n LP-1667SG solar gray tint - $465.00

p/n LP-1667UV-GT UV Blocking Green Tint - $605.00

p/n LP-1667UV-SG UV Blocking Solar Gray Tint - $605.00

 

Note to scratch/plans builders: if you are scratch building and want to purchase an engine mount *** wait to weld in the attach bushings until you have our engine mount on hand so you can best position the attach bushings to bolt in place our engine mount. The mount will most likely not fit well or at all if you already have your attach bushings welded in place. The engine mounts are made to fit our kits.

Engine Mount for Cont 4cy Engine


Price: $339.20 + $40 S&H

 

Bearhawk fuel line gascolator made from 6061T6 aluminum, minimum internal port size 5/16 inch diameter. Max operating pressure 150 psi. 2 1/2 inch diameter with 3 inch height. inlet and outlet are 1/4 NTP. 1/8 NPT for quick drain on bottom of bowl. Comes with extra O-ring set. Free shipping if you send BH plans number with order.

Gascolator Assembly $83.21

Fuel cap assemblies

Includes all viton O-rings & nylon washers

Fuel cap assemblies $78/ pair + $10 S&H

K1000-06 all metal nutplate for #6 screw Available in quantities of 200 or 400 Price - 200 - $88.00 400 - $176.00 Shipping $8.00 for either quantity

K1000-06 all metal nutplate qty. 200: $88.00 + ($8 S&H)

K1000-06 all metal nutplate qty. 400: $176.00 + ($8 S&H)



AURORA ROD END BEARING PACKAGE for LSA

MM-3 qty 2; GMM-3M-470 qty 4; GMM-3M-570 qty 2; GMM-3M-680 qty 3; XAM-6 qty 2
$158.48 + $6 S&H
No picture available
Gerdes short shaft brake master cylinders with special clevis end of 7075T6 which allows for max adjustment of length. Now overhauled w/all new orings and polished bore and shaft.


Gerdes Short Shaft Brake Master Cylinders
$140.00/pair + $10 S&H

Bearhawk/Patrol/LSA tailwheel assembly. Complete with wheel, Aero Classic tire and tube. Available in 8", 10", or Tundra for either the Patrol or LSA (mount for Tapered Rod Spring) or Bearhawk (mount for 1 1/2" Leaf Spring)

Available at http://bhtailwheels.com

LSA stainless round tail spring.
First heat treated to the proper hardness, and then machined to shape.

LSA Tail wheel spring Price $102.82 + $12 shipping.

LSA aileron bellcrank bearings - 4 required

Price $6.36 each + $5.20 S&H

LSA aileron flap mount bearings - 4 required

Price $7.42 each + $5.20 S&H

Spar Web and Rib package

All spar webs of .032 2024T3 bent up to match the ribs we have professionally hydroformed. Includes webs for front wing spars, rear wing spars, aileron spars. This package also includes all the parts that have to be bent on long brakes. These parts are the trailing edge material.

Spar Web and Rib package
Price: $3339 + $175 S&H

 

Ribs package
- includes all ribs for one LSA including main ribs (.025 & .032), nose ribs, aileron nose & main ribs, pocket ribs, & trailing edge ribs. These ribs are professionally hydroformed in the 0 condition and then hardened to the T-351 spec.

Price of all ribs for one LSA:
$2120 + $45 S&H

 

LSA spar webs only
Spar webs only along with all aluminum parts that require a 8 ft. or 10 ft. brake

LSA wing spars:
Price $1219 + $135 S&H

Bearhawk Aircraft now offers a tubing package for the basic fuselage. All tubes are full length(per plans), all bent to shape, and with all tube ends notched or "fishmouthed" to fit together. We assemble this package in our fuselage tooling, then remove the tubing, label each tube as to its correct location, and pack into a long cardboard tube for shipping. LSA Tubing Package - $3300 + Please contact for shipping cost before ordering
No picture available