Bearhawk 4-Place

Showing all 38 results

• 

  Plans #11 – Aileron Pushrods

  $495.00

  Plans #11 package – 6 parts total consisting of:
  2 Aileron support frames
  2 Aileron bellcranks
  2 Aileron pushrods
• 

  Plans #12 – Flap Torque Tubes w/Inboard Lever

  $344.00

  Plans #12 package – 10 parts total consisting of:
  2 Flap support frames
  2 Flap torque tubes w/inboard lever
  2 Flap pushrods
  4 Flap arms
• 

  Plans #13 – Aileron Hinge Mounts 

  $330.00

  Plans #13 package –  4 parts total consisting of:
  Aileron hinge mounts
  2 Inboard
  2 Outboard
• 

  Plans #14 – Flap Hinge Mounts

  $625.00

  Plans # 14 package – Flap hinge mounts, aileron & flap hinges:
  Flap hinge mounts 6 pieces, aileron & flap hinges – 10 sets of 2
• 

  Plans #15 – Flap Torque Tube

  $200.00

  Flap torque tube supports & pulley brackets
• 

  Plans #16 – Wing Strut Attach Straps

  $120.00

  Wing strut attach straps – 4 pieces of .190 4130N sheet
• 

  Plans #16A – Wing Strut Ends

  $190.00

  Bearhawk Wing Strut Ends. Four required. Two upper (strut to wing) and two lower (strut to fuselage). Milled from 2024T351.
• 

  Plans #23 – Horizontal Stabs & Elevators

  $1,275.00

  Plans #23 package – 4 parts total consisting of:
  Horizontal Stabs 2 (1L & 1R)
  Elevators 2 (1R & 1L)

  Not pictured but included with this package are all the trim system parts including the two push rods(not bent).
• 

  Plans #24 – Tail Rib Package

  $550.00

  All Rudder, Vstab, Elevator, and Hstab ribs
  bent to spec and left long for fitting/welding.
• 

  Plans #25 – Rudder

  $425.00

  Plans #25 package – 1 part consisting of:
  1 Rudder w/ tailwheel steering arm
• 

  Plans #26 – Landing Gear

  $975.00

  Plans #26 package – 2 parts consisting of:

  Landing gear 2 (1L & 1R)
• 

  Plans #28 – Shock Struts

  $895.00

  Plans #28 package – 6 parts total consisting of:
  2 Shock Struts
  2 3/4 Inner Tubes w/piston welded in place
  2 Bronze Top caps
• 

  Plans #29 – Control Sticks

  $625.00

  Plans #29 package – 6 parts total consisting of:
  Control sticks
  1 Control Stick frame
  1 Elevator bellcrank
  1 Stick to bellcrank pushrod
  1 Tube connecting stick bottoms
• 

  Plans #30 – Rudder Pedal Assembly

  $375.00

  Plans #30 package – 3 parts total consisting of:
  1 Rudder pedal assembly
  2 brake pedals
• 

  Plans #31 – Aluminum Flap Guide

  $285.00

  Plans #31 package – 3 parts total consisting of:
  1 Flap handle
  1 T7 tube that goes inside handle
  1 Aluminum flap guide
• 

  Round Tail Spring

  $107.00
• 

  Front Seat Frames

  $450.00

  2 Front Seat frames
• 

  Rear Seat Frame

  $285.00

  Rear Seat frame
• 

  Main Fuel Tanks

  $925.00

  2 Main fuel tanks 1L & 1R (25 gal each)  
• 

  Aux Tanks

  $580.00

  2 Aux tanks 1L & 1R (11 gal)  
• 

  Windshield – Standard Cessna 170

  $458.00 – $657.00

  Windshield – Standard Cessna 170 (requires trimming to fit Bearhawk) 3/16″ thick

  LP AeroPlastics windshields in UV-SG in Solar Gray tint and UV-GT green tint are now available in windshields and side windows. They block all of the UVB and 99% of the UVA radiation,  and 30% more of the Near Infrared radiation (heat) than standard tints.

  Note: All windshields are drop shipped directly from LPAero Plastics. Shipping and handling are normally $130 – $180
• 

  Windshield – Bearhawk

  $458.00 – $657.00

  Windshield – Bearhawk (minor or no trimming required) 3/16″ thick

  LP AeroPlastics windshields in UV-SG in Solar Gray tint and UV-GT green tint are now available in windshields and side windows. They block all of the UVB and 99% of the UVA radiation,  and 30% more of the Near Infrared radiation (heat) than standard tints.

  Note: All windshields are drop shipped directly from LPAero Plastics. Shipping and handling are normally $90 – $105
• 

  Tail Wheel Springs with U-clamp

  $137.80

  – Tail wheel spring set
  – for original BH – not Model B
• 

  Bearhawk/Patrol/LSA Tailwheel Assemblies

  Complete with wheel, Aero Classic tire and tube. Available in 8″, 10″, or Tundra for either the Patrol or LSA (mount for Tapered Rod Spring) or Bearhawk (mount for 1 1/2″ Leaf Spring)

  Available at https://bhtailwheels.com
• 

  Wing Strut Tie Down Rings

  $25.00

  Tie down ring set
• 

  Bearhawk Aileron Bellcrank Bearings – 4 required

  $8.50

  Price $8.50 each
• 

  Continental O-470 Bed Mount

  $875.00

  Cont. O-470 motor mount painted

   
• 

  Lycoming O-540 Type I Dynafocal

  $775.00

  Lyc. O-540 Type I motor mount painted

   
• 

  Lycoming O-540 Type II Dynafocal

  $775.00

  Lyc. O-540 Type ll motor mount painted

   
• 

  Lycoming O-360 Type I Dynafocal

  $775.00

  Lyc. O-360 Type l motor mount painted

   
• 

  Trim Wheel w/ chain

  $60.00

  1/4″ Aluminum w/ 9 tooth sprocket installed.

  Also available with this order: 14 inches of no.25 trim chain (optional)

   
• 

  Aileron/Flap hinge rod ends

  $21.20

  **Only for original Bearhawk 4-Place wing. NOT for Model B Bearhawk wing**

  Rod end bearings to mount your ailerons & flaps.
  The price is $21.20 each + a flat fee of $8.20 to cover shipping costs for this item
• 

  Aurora Rod End Bearing Package for Bearhawk

  $185.00

  MM3 qty 2 +
  GMM-3M-570 qty 8 +
  XAM-7 qty 2
• 

  Rear Seat Attachment Bolts

  $13.00

  Rear Seat attachment bolts

   
• 

  Rib / Spar Web Package

  $4,200.00

  This package consists of all wing ribs, aileron ribs, flap ribs, and false ribs. Ribs are professionally hydroformed with lightening holes cut and flanged. The ribs will still need to be straightened and have the vertical stiffener angles installed. Included are all .032 spar webs for the main spars, rear spars, false spars, aileron spars, and flap spars. Also included are all the aluminum parts that need to be bent on an 8ft. brake. These consist of the wing trailing edge skin stiffeners in the flap area (4 pieces ) and the aileron/flap trailing edges ( 4 pieces ).

  Note: This package eliminates one of the harder tasks for the scratch builder – finding an 8ft. brake and bending the spar webs to match your ribs.
• 

  Ribs Alone

  $2,750.00

  All ribs mentioned in the Rib/Spar Web Package except the four false ribs.
• 

  Spar Webs Alone

  $1,445.00

  Spar webs alone
• 

  4-Place BH Tubing Package

  $4,350.00

  Due to 4130 tubing shortages right now – tubing packages are temporarily unavailable.

   

  All tubes are full length(per plans), all bent to shape, and with all tube ends notched or “fishmouthed” to fit together. We assemble this package in our fuselage tooling, then remove the tubing, label each tube as to its correct location, and pack into a long cardboard tube for shipping

  4-Place BH Tubing Package – $3850 + Please contact for shipping cost before ordering