Companion

Showing all 25 results

• 

  Plans #8 – Aileron pushrods

  $495.00

  Plans #8 package – 6 parts total consisting of:
  2 Aileron support frames
  2 Aileron bellcranks
  2 Aileron pushrods
• 

  Plans #9 – Flap Torque Tubes w/Inboard Lever

  $344.00

  Plans #9 package – 10 parts total consisting of:
  2 Flap support frames
  2 Flap torque tubes w/inboard lever
  2 Flap pushrods
  4 Flap arms
• 

  Plans #13 Flap Hinge Mounts

  $625.00

  Plans # 13 package – Flap hinge mounts, aileron & flap hinges:
  Flap hinge mounts 6 pieces, aileron & flap hinges – 10 sets of 2
• 

  Plans #14 – Aileron Hinge Mounts

  $330.00

  Plans #14 package –  4 parts total consisting of:
  Aileron hinge mounts
  2 Inboard
  2 Outboard
• 

  Plans #15 – Flap Torque Tube

  $200.00

  Flap torque tube supports & pulley brackets
• 

  Plans #16 – Wing Strut Attach Straps

  $120.00

  Wing strut attach straps – 4 pieces of .190 4130N sheet
• 

  Plans #16A – Wing Strut Ends

  $190.00

  Bearhawk Wing Strut Ends. Four required. Two upper (strut to wing) and two lower (strut to fuselage). Milled from 2024T351.
• 

  Plans #22 – Horizontal Stabs & Elevators

  $1,550.00
• 

  Plans #23 – Tail Rib Package

  $675.00

  All Rudder, Vstab, Elevator, and Hstab ribs
  bent to spec and left long for fitting/welding.
• 

  Plans #24 – Rudder

  $525.00

  Plans #24 package – 1 part consisting of:
  1 Rudder w/ tailwheel steering arm
• 

  Plans #25 – Landing Gear

  $1,275.00

  Plans #23 package – 2 parts consisting of:

  Landing gear 2 (1L & 1R) 
• 

  Plans #27 – Shock Struts

  $1,095.00

  Plans #27 package – 6 parts total consisting of:
  2 Shock Struts
  2 3/4 Inner Tubes w/piston welded in place
  2 Bronze Top caps
• 

  Plans #28 – Control Sticks

  $825.00

  Plans #28 package – 6 parts total consisting of:
  Control sticks
  1 Control Stick frame
  1 Elevator bellcrank
  1 Stick to bellcrank pushrod
  1 Tube connecting stick bottoms
• 

  Plans #29 – Rudder Pedal Assembly

  $375.00

  Plans #29 package – 3 parts total consisting of:
  1 Rudder pedal assembly
  2 brake pedals
• 

  Plans #30 package – Companion

  $435.00

  Plans #30 package – 3 parts total consisting of:
  1 Flap handle
  1 T7 tube that goes inside handle
  1 Aluminum flap guide
• 

  Companion Ribs Package

  $2,750.00

  – includes all ribs for one Patrol including main ribs (.025 & .032), nose ribs, flap nose & main ribs, aileron nose & main ribs, pocket ribs, & trailing edge ribs. These ribs are professionally hydroformed in the 0 condition and then hardened to the T-351 spec
• 

  Front Seat Frames

  $625.00

  2 Front Seat frames
• 

  Main Fuel Tanks

  $1,100.00

  2 Main fuel tanks 1L & 1R (25 gal each)  
• 

  Patrol\Companion Stainless Round Tail Spring

  $130.00

  Heat treated to the proper hardness, and then machined to shape. 
• 

  Wing Strut Tie Down Rings

  $25.00

  Tie down ring set
• 

  Lycoming O-360 Type I Dynafocal

  $925.00

  Lyc. O-360 Type l motor mount painted

   
• 

  Rib / Spar Web Package

  $4,200.00

  This package consists of all wing ribs, aileron ribs, flap ribs, and false ribs. Ribs are professionally hydroformed with lightening holes cut and flanged. The ribs will still need to be straightened and have the vertical stiffener angles installed. Included are all .032 spar webs for the main spars, rear spars, false spars, aileron spars, and flap spars. Also included are all the aluminum parts that need to be bent on an 8ft. brake. These consist of the wing trailing edge skin stiffeners in the flap area (4 pieces ) and the aileron/flap trailing edges ( 4 pieces ).

  Note: This package eliminates one of the harder tasks for the scratch builder – finding an 8ft. brake and bending the spar webs to match your ribs.
• 

  Patrol Aileron Bellcrank Bearings

  $6.36

  4 required

  Price $6.36 each + $8.20 S&H
• 

  Spar Webs Alone

  $1,445.00

  Spar webs alone
• 

  4-Place BH Tubing Package

  $4,350.00

  Due to 4130 tubing shortages right now – tubing packages are temporarily unavailable.

   

  All tubes are full length(per plans), all bent to shape, and with all tube ends notched or “fishmouthed” to fit together. We assemble this package in our fuselage tooling, then remove the tubing, label each tube as to its correct location, and pack into a long cardboard tube for shipping

  4-Place BH Tubing Package – $3850 + Please contact for shipping cost before ordering