Group A
Showing all 70 results
-
Plans #11 – Aileron Pushrods
$495.00Plans #11 package – 6 parts total consisting of:
2 Aileron support frames
2 Aileron bellcranks
2 Aileron pushrods -
Plans #12 – Flap Torque Tubes w/Inboard Lever
$344.00Plans #12 package – 10 parts total consisting of:
2 Flap support frames
2 Flap torque tubes w/inboard lever
2 Flap pushrods
4 Flap arms -
Plans #13 – Aileron Hinge MountsÂ
$330.00Plans #13 package –Â 4 parts total consisting of:
Aileron hinge mounts
2 Inboard
2 Outboard -
Plans #14 – Flap Hinge Mounts
$625.00Plans # 14 package – Flap hinge mounts, aileron & flap hinges:
Flap hinge mounts 6 pieces, aileron & flap hinges – 10 sets of 2 -
Plans #23 – Horizontal Stabs & Elevators
$1,600.00Plans #23 package – 4 parts total consisting of:
Horizontal Stabs 2 (1L & 1R)
Elevators 2 (1R & 1L)Not pictured but included with this package are all the trim system parts including the two push rods(not bent).
-
Plans #25 – Rudder
$525.00Plans #25 package – 1 part consisting of:
1 Rudder w/ tailwheel steering arm -
Plans #28 – Shock Struts
$1,095.00Plans #28 package – 6 parts total consisting of:
2 Shock Struts
2 3/4 Inner Tubes w/piston welded in place
2 Bronze Top caps -
Plans #29 – Control Sticks
$825.00Plans #29 package – 6 parts total consisting of:
Control sticks
1 Control Stick frame
1 Elevator bellcrank
1 Stick to bellcrank pushrod
1 Tube connecting stick bottoms -
Plans #30 – Rudder Pedal Assembly
$375.00Plans #30 package – 3 parts total consisting of:
1 Rudder pedal assembly
2 brake pedals -
Plans #8 – Aileron Support Frames
$495.00– includes page #8 parts:
2 aileron support frames2 aileron bellcranks
-
Plans #9 – Flaps
$455.00includes:
Flap support frames (2 pieces)
Inboard flap levers (2 pieces)
Flap arms (4 pieces)
Flap pushrods (2 pieces w/bushings) -
Plans #13 & 14 – Hinge Mount Flaps
$625.00– includes page #13 & #14 parts:
Hinge mount flap inboard & outboard
(4 pieces)
Hinge mount Flap center (2 pieces)
Flap inboard & outboard hinges
(4 sets of 2)
Flap center hinges (2 sets of 2)
Aileron hinges inboard (2 sets of 2)
Aileron hinges outboard (2 sets of 2)
Aileron hinge mounts outboard (2 pieces)
Aileron hinge mounts inboard ( 2 pieces) -
Plans #15 – Aileron Cable Pulley Bracket
$200.00includes:
Support tube (2 pieces)
Aileron cable pulley bracket (2 pieces) -
Patrol Wing strut attach fittings
$95.40Wing strut attach fittings (4 pieces) – $95.40 + $12 S&H
-
Plans #16 – Wing Strut Ends
$180.00Wing strut ends milled out of 2024T4
(4 pieces) -
Plans #22 – Elevators
$1,550.00includes:
2 Hor Stabs (L&R)
2 Elevators (L&R) w/horns installed
2 trim horns
2 trim linkage parts installed
2 trim pushrods (straight) -
Plans #23 – Rudder Assembly
$525.00Rudder Assembly
-
Plans #24 – Horizontal & Vertical Stabilizer Ribs
$675.00Elevator & Rudder Ribs
11 airfoil shaped ribs
22 flat or tapered ribs -
Plans #26 – Landing Gear Legs w/ Step
$1,200.00Landing gear legs w/ welded step: 1 L & 1 R
-
Plans #28 – Shock Struts
$1,050.001 L & 1 R
2 pistons welded to shaft
2 Hard bronze top caps
Includes o-ring & snap ring kit -
Plans #29 – Control Stick Assy
$800.001 front stick
1 rear stick
Stick bases (front & rear) welded to 1.25x.035 torque tube
1 interconnect tube
1 idler arm -
Plans #30 – Rudder Pedals & Brakes
$300.002 front rudder pedals
2 rear rudder pedals
4 cable links for front pedals
4 cable links for rear pedals -
Plans #31 – Flap Control Assy
$395.001 Flap handle
1 Inner latch pin release assy
1 mount plate
1 aluminum flap position quadrant
2 .080 tabs -
LSA Plans page #8 parts
$432.48 – $474.88Plans page #8 parts – includes:
Aileron support frames (2 pieces)
Aileron bellcranks (2 pieces)
Aileron pushrods (2 pieces) -
LSA Plans page #11 parts
$302.10 – $328.60Plans page #11 parts – includes:
Aileron hinge mounts (4 pieces)
Aileron hinges (8 pieces) -
LSA Plans page #12
$233.20 – $259.70Plans page #12
– includes page #12 parts:
Aileron cable pulley brackets (2 pieces)
Wing strut attach fitting (4 pieces)
Fairlead mounts at wing root (2 pieces) -
LSA Plans page #13 parts
$153.70Plans page #13 parts – includes:
Aluminum wing strut ends (4 pieces)Plans page # 13: $153.70 ($8.20 S&H)
-
LSA Plans page #19 parts
$1,300.00Plans page #19 parts
– includes:
Horstabs (2 pieces)
Elevators (2 pieces)
Trim Horns (2 pieces)
Trim Pushrods (2 pieces)
Trim Shafts (2 pieces) -
LSA Plans page #20 parts
$475.00Plans page #20 parts
Rudder (1 piece)
Tail Wire Ends (6 pieces) -
LSA Plans #21 parts
$408.10Plans #21 parts
Hor Stab Ribs (10 pieces)
Vert Stab Ribs (3 pieces)
Elevator Ribs (8 pieces)
Rudder Ribs (4 pieces)Price $408.10 + $30 s+h
-
LSA Plans page#22
$111.30 – $121.90Plans #22 – Trim handle only (1 piece)
-
LSA Plans #23 parts
$1,050.00Plans #23 parts
Landing Gear as set up for Matco Wheels/Brakes– one right one left. Right side comes with step but the step can be eliminated to save weight. -
LSA Plans #25 parts
$960.00Plans #25 parts
Shock Struts (2 pieces)
Pistons with welded shaft (2 pieces)
Bronze top caps (2 pieces)
O-ring/Snap ring set (1 piece) -
LSA Plans #26 parts
$760.00Plans #26 parts
Control Sticks (2 pieces – 1F + 1R)
Idler Arm (1 piece)
Interconnect tube (1 piece)
1-1/4″ Torque Tube (1 piece)
Push/Pull tube to idler arm (1 piece)
Does not include long push/pull tube to elevator -
LSA Plans #27 parts
$238.50 – $270.30Plans #27 parts
Front Rudder Pedals (2 pieces)
Brake Pedals (2 pieces)
Rear Pedals (2 pieces)
Links for Front Pedals (4 pieces)
Links for Rear Pedals (4 pieces)
Small 4130 Bushings (4 pieces) -
LSA Plans #28 parts
$525.00Plans #28 parts
Front Seat (1 piece)
Rear Seat (2 piece)
Small attach fitting (6 pieces) -
Engine Mount for Continental 4cy Engine
$339.20Price: $339.20 + $75 S&H
-
Plans #20 package
$1,050.00 – $1,150.00Plans #20 package – 4 parts total consisting of:
Horizontal Stabs 2 (1L & 1R)
Elevators 2 (1R & 1L)Not pictured but included with this package are all the trim system parts including the two push rods(not bent).
-
Plans #21 package
$337.08 – $371.00Plans #21 package – 1 part consisting of:
1 Rudder w/ tailwheel steering arm -
Front Seat Frames
$625.002 Front Seat frames
-
Rear Seat Frame
$385.00Rear Seat frame
-
Main Fuel Tanks
$1,100.002 Main fuel tanks 1L & 1R (25 gal each)Â Â
-
Aux Tanks
$725.002 Aux tanks 1L & 1R (11 gal)Â Â
-
Bearhawk fuel line gascolator
$90.00Bearhawk fuel line gascolator made from 6061T6 aluminum, minimum internal port size 5/16 inch diameter. Max operating pressure 150 psi. 2 1/2 inch diameter with 3 inch height. inlet and outlet are 1/4 NTP. 1/8 NPT for quick drain on bottom of bowl. Comes with extra O-ring set. Free shipping if you send BH plans number with order. Gascolator Assembly: $90 + 12 S&H
-
Fuel cap assemblies
$85.00Includes all viton O-rings & nylon washers
Fuel cap assemblies $85/ pair + $10 S&H
-
K1000-06 all metal nutplate for #6 screw
$88.00 – $176.00K1000-06 all metal nutplate for #6 screw. Available in quantities of 200 & 400.
200 – $88.00 ;Â 400 – $176.00
Shipping $8.20 for either quantity
-
Patrol\Companion Stainless Round Tail Spring
$130.00Heat treated to the proper hardness, and then machined to shape.Â
-
Tail Wheel Springs with U-clamp
$137.80– Tail wheel spring set
– for original BH – not Model B -
Bearhawk/Patrol/LSA Tailwheel Assemblies
Complete with wheel, Aero Classic tire and tube. Available in 8″, 10″, or Tundra for either the Patrol or LSA (mount for Tapered Rod Spring) or Bearhawk (mount for 1 1/2″ Leaf Spring)
-
LSA stainless round tail spring
$130.00Heat treated to the proper hardness, and then machined to shape.
-
Patrol Wing Strut Tie Down Rings
$25.00Tie down ring setÂ
-
Wing Strut Tie Down Rings
$25.00Tie down ring set
-
Bearhawk Aileron Bellcrank Bearings – 4 required
$8.50Price $8.50 each
-
Continental O-470 Bed Mount
$875.00Cont. O-470 motor mount painted
-
Lycoming O-540 Type I Dynafocal
$925.00Lyc. O-540 Type I motor mount painted
-
Lycoming O-540 Type II Dynafocal
$925.00Lyc. O-540 Type ll motor mount painted
-
Lycoming O-360 Type I Dynafocal
$925.00Lyc. O-360 Type l motor mount painted
-
Trim Wheel w/ chain
$60.001/4″ Aluminum w/ 9 tooth sprocket installed.
Also available with this order:Â 14 inches of no.25 trim chain (optional)
-
Cable guards
$45.00Cable guards set: $45.00 including S&H
-
Rear Seat Attachment Bolts
$13.00Rear Seat attachment bolts
-
LSA aileron bellcrank bearings
$6.36LSA aileron bellcrank bearings – 4 required
Price $6.36 each + $8.20 S&H
-
LSA aileron flap mount bearings
$7.42LSA aileron flap mount bearings – 4 required
Price $7.42 each + $8.20 S&H
-
LSA spar webs only
$1,219.00LSA spar webs only
Spar webs only along with all aluminum parts that require a 8 ft. or 10 ft. brakeLSA wing spars:
Price $1219 + $135 S&H -
LSA Tubing Package
$3,550.00Due to 4130 tubing shortages right now – tubing packages are temporarily unavailable.
Bearhawk Aircraft now offers a tubing package for the basic fuselage. All tubes are full length(per plans), all bent to shape, and with all tube ends notched or “fishmouthed” to fit together. We assemble this package in our fuselage tooling, then remove the tubing, label each tube as to its correct location, and pack into a long cardboard tube for shipping.
LSA Tubing Package – $3300 + Please contact for shipping cost before ordering
-
Patrol Aileron Bellcrank Bearings
$6.364 required
Price $6.36 each + $8.20 S&H
-
Patrol Aileron Flap Mount Bearings
$7.4210 required
Price $7.42 each + $8.20 S&H
-
Patrol Spar Webs Only
$1,445.00Spar webs only along with all aluminum parts that require a 8 ft. or 10 ft. brake
-
Patrol Tubing Package
$4,050.00Due to 4130 tubing shortages right now – tubing packages are temporarily unavailable.
Bearhawk Aircraft now offers a tubing package for the basic fuselage. All tubes are full length(per plans), all bent to shape, and with all tube ends notched or “fishmouthed” to fit together. We assemble this package in our fuselage tooling, then remove the tubing, label each tube as to its correct location, and pack into a long cardboard tube for shipping.
-
Spar Webs Alone
$1,445.00Spar webs alone
-
4-Place BH Tubing Package
$4,350.00Due to 4130 tubing shortages right now – tubing packages are temporarily unavailable.
All tubes are full length(per plans), all bent to shape, and with all tube ends notched or “fishmouthed” to fit together. We assemble this package in our fuselage tooling, then remove the tubing, label each tube as to its correct location, and pack into a long cardboard tube for shipping
4-Place BH Tubing Package – $3850 + Please contact for shipping cost before ordering
