Bearhawk LSA

Showing all 25 results

  • Placeholder

    LSA Plans page #8 parts

    $432.48$474.88

    Plans page #8 parts – includes:
    Aileron support frames (2 pieces)
    Aileron bellcranks (2 pieces)
    Aileron pushrods (2 pieces)

  • Placeholder

    LSA Plans page #11 parts

    $302.10$328.60

    Plans page #11 parts – includes:
    Aileron hinge mounts (4 pieces)
    Aileron hinges (8 pieces)

  • Placeholder

    LSA Plans page #12

    $233.20$259.70

    Plans page #12
    – includes page #12 parts:
    Aileron cable pulley brackets (2 pieces)
    Wing strut attach fitting (4 pieces)
    Fairlead mounts at wing root (2 pieces)

  • LSA Plans page #13 parts

    $153.70

    Plans page #13 parts – includes:
    Aluminum wing strut ends (4 pieces)

    Plans page # 13: $153.70 ($8.20 S&H)

  • LSA Plans page #19 parts

    $1,300.00

    Plans page #19 parts
    – includes:
    Horstabs (2 pieces)
    Elevators (2 pieces)
    Trim Horns (2 pieces)
    Trim Pushrods (2 pieces)
    Trim Shafts (2 pieces)

  • LSA Plans page #20 parts

    $475.00

    Plans page #20 parts
    Rudder (1 piece)
    Tail Wire Ends (6 pieces)

  • Placeholder

    LSA Plans #21 parts

    $408.10

    Plans #21 parts
    Hor Stab Ribs (10 pieces)
    Vert Stab Ribs (3 pieces)
    Elevator Ribs (8 pieces)
    Rudder Ribs (4 pieces)

    Price $408.10 + $30 s+h

  • Placeholder

    LSA Plans page#22

    $111.30$121.90

    Plans #22 – Trim handle only (1 piece)

  • LSA Plans #23 parts

    $1,050.00

    Plans #23 parts
    Landing Gear as set up for Matco Wheels/Brakes– one right one left. Right side comes with step but the step can be eliminated to save weight.

  • Placeholder

    LSA Plans #25 parts

    $960.00

    Plans #25 parts
    Shock Struts (2 pieces)
    Pistons with welded shaft (2 pieces)
    Bronze top caps (2 pieces)
    O-ring/Snap ring set (1 piece)

  • LSA Plans #26 parts

    $760.00

    Plans #26 parts
    Control Sticks (2 pieces – 1F + 1R)
    Idler Arm (1 piece)
    Interconnect tube (1 piece)
    1-1/4″ Torque Tube (1 piece)
    Push/Pull tube to idler arm (1 piece)
    Does not include long push/pull tube to elevator

  • LSA Plans #27 parts

    $238.50$270.30

    Plans #27 parts
    Front Rudder Pedals (2 pieces)
    Brake Pedals (2 pieces)
    Rear Pedals (2 pieces)
    Links for Front Pedals (4 pieces)
    Links for Rear Pedals (4 pieces)
    Small 4130 Bushings (4 pieces)

  • LSA Plans #28 parts

    $525.00

    Plans #28 parts
    Front Seat (1 piece)
    Rear Seat (2 piece)
    Small attach fitting (6 pieces)

  • Placeholder

    Windshield – LSA (same as Patrol)

    $388.00$605.00

    (minor or no trimming required) 1/8″ thick

    LP AeroPlastics windshields in UV-SG in Solar Gray tint and UV-GT green tint are now available in windshields and side windows. They block all of the UVB and 99% of the UVA radiation,  and 30% more of the Near Infrared radiation (heat) than standard tints.

    Note: All windshields are drop shipped directly from LPAero Plastics. Shipping and handling are normally $130 – $180

  • Windshield – Patrol & LSA

    $363.00$510.00

    (minor or no trimming required) 1/8″ thick

    LP AeroPlastics windshields in UV-SG in Solar Gray tint and UV-GT green tint are now available in windshields and side windows. They block all of the UVB and 99% of the UVA radiation,  and 30% more of the Near Infrared radiation (heat) than standard tints.

    Note: All windshields are drop shipped directly from LPAero Plastics. Shipping and handling are normally $130 – $180

  • Placeholder

    Engine Mount for Continental 4cy Engine

    $339.20

    Price: $339.20 + $75 S&H

  • Placeholder

    AURORA ROD END BEARING PACKAGE for LSA

    $158.48

    MM-3 qty 2; GMM-3M-470 qty 4; GMM-3M-570 qty 2; GMM-3M-680 qty 3; XAM-6 qty 2
    $158.48 + $8.20 S&H

  • Bearhawk/Patrol/LSA Tailwheel Assemblies

    Complete with wheel, Aero Classic tire and tube. Available in 8″, 10″, or Tundra for either the Patrol or LSA (mount for Tapered Rod Spring) or Bearhawk (mount for 1 1/2″ Leaf Spring)

    Available at https://bhtailwheels.com

  • LSA stainless round tail spring

    $130.00

    Heat treated to the proper hardness, and then machined to shape.

  • LSA aileron bellcrank bearings

    $6.36

    LSA aileron bellcrank bearings – 4 required

    Price $6.36 each + $8.20 S&H

  • LSA aileron flap mount bearings

    $7.42

    LSA aileron flap mount bearings – 4 required

    Price $7.42 each + $8.20 S&H

  • Placeholder

    LSA Spar Web and Rib package

    $3,689.00

    All spar webs of .032 2024T3 bent up to match the ribs we have professionally hydroformed. Includes webs for front wing spars, rear wing spars, aileron spars. This package also includes all the parts that have to be bent on long brakes. These parts are the trailing edge material.

    Spar Web and Rib package
    Price: $3339 + $175 S&H

  • Placeholder

    LSA Ribs package

    $2,750.00

    Ribs package
    – includes all ribs for one LSA including main ribs (.025 & .032), nose ribs, aileron nose & main ribs, pocket ribs, & trailing edge ribs. These ribs are professionally hydroformed in the 0 condition and then hardened to the T-351 spec.

    Price of all ribs for one LSA:
    $2120 + $45 S&H

  • Placeholder

    LSA spar webs only

    $1,219.00

    LSA spar webs only
    Spar webs only along with all aluminum parts that require a 8 ft. or 10 ft. brake

    LSA wing spars:
    Price $1219 + $135 S&H

  • Placeholder

    LSA Tubing Package

    $3,550.00

    Due to 4130 tubing shortages right now – tubing packages are temporarily unavailable.

    Bearhawk Aircraft now offers a tubing package for the basic fuselage. All tubes are full length(per plans), all bent to shape, and with all tube ends notched or “fishmouthed” to fit together. We assemble this package in our fuselage tooling, then remove the tubing, label each tube as to its correct location, and pack into a long cardboard tube for shipping.

    LSA Tubing Package – $3300 + Please contact for shipping cost before ordering

YouTube
Instagram