Bearhawk Parts and Pieces

Parts For Sale by Bearhawk Aircraft

Bearhawk Aircraft has been manufacturing kits and parts for the Bearhawk since 2001. In 2009, we started manufacturing kits & parts for the Patrol. All parts manufactured by Bearhawk Aircraft are made under the supervision and authorization of Bob Barrows, design engineer of the Bearhawk & Patrol.

The parts prices and packing/shipping charges are listed separately. If
you use PayPal, the packing/shipping prices will be automatically added.

For questions, email us at:

, or send us a letter to:

Bearhawk Aircraft
P.O. Box 9018
Austin, TX 78766

  All the parts on certain pages of the plans are offered as
a package
. This will include all the parts needed for one Bearhawk even
though the picture might just have one example of a certain part.

2  While
the parts in the pictures are mostly primered and painted as we
deliver them in the QB kits, in an effort to keep the prices as low as
possible they can be sold unpainted only oiled. If you would
like, you can order your parts sandblasted, primered, and painted - we
use Mil-P-23377F strotium chromate epoxy primer and then top coat with
Mil-C-22750D epoxy grey paint.

3  There
are a few small bushings that the plans call for that are not in
the pictures. These bushings will be included with the parts where they
are used.
All parts are made to order. They will be made and shipped on the next truck
that brings our QB kits in order to keep transport costs low. Kit shipments
are every 6 to
8 weeks.

Plans #11 package - 6 parts total

consisting of:
2 Aileron support
2 Aileron bellcranks
2 Aileron pushrods (5/16 threads both sides)

package - Unpainted $432.48 + $25 S&H

#11 package - painted -$474.88 + $25 S&H

Plans #12 package - 10 parts total

consisting of:
2 Flap support frames
2 Flap torque tubes     w/inboard lever
2 Flap pushrods
4 Flap arms

Plans#12 package Unpainted $366.76 + $25 S&H

Plans#12 package Painted $403.86 + $25 S&H

on image for a closer view


Plans #13 package - 30 parts total

consisting of:
4 Aileron

4 Aileron hinges-outboard

4 Flap hinges-center
8 Flap hinges-inboard & outboard

2 Aileron hinge mount-inboard

2 Aileron hinge mount-outboard

4 Flap hinge mounts
w/o hole

2 Flap hinge mounts

Plans#13 package unpainted $447.32 + $20 S&H

Plans#13 package painted $491.84 + $20 S&H

Plans # 14 package - 8 parts total

consisting of:
2 Aileron cable pulley
4 Wing strut attach fittings
2 Inboard support tube s

Plans#14 package unpainted - $360.40 + $20 S&H

Plans#14 package painted - $396.44 + $20 S&H


Plans #20 package - 4 parts total

consisting of:
Stabs 2 (1L & 1R)
Elevators 2 (1R & 1L)

Not pictured but included
with this package are all the trim system parts including the two push
rods(not bent).

Plans#20 package unpainted $842.70 + $70 S&H

Plans#20 package painted $943.40 + $70 S&H

Plans #21 package - 1 part

consisting of:
1 Rudder w/ tailwheel steering arm

Plans#21 package unpainted $337.08 + $25 S&H

Plans#21 package painted $371 + $25 S&H


Plans #23 package - 2 parts

consisting of:

Landing gear 2 (1L & 1R)

Plans#23 w/AviPro welded step - unpainted $757.90 + $45 S&H

Plans#23 w/AviPro welded step - painted $833.16 + $45 S&H

Plans#23 w/o step (per plans)- unpainted $699.60
+ $45 S&H

Plans#23 w/o step (per plans)- painted $769.56 + $45 S&H


Plans #25 package - 6 parts total

2 Shock
2 3/4 Inner Tubes w/piston welded in
2 Bronze Top caps


Plans#25 package unpainted $715.50 + $30 S&H

Plans#25 package painted $768.50 + $30 S&H

Plans #26 package - 6 parts total

consisting of:

Control sticks
1 Control Stick frame

1 Elevator bellcrank
1 Stick to bellcrank pushrod
1 Tube connecting stick bottoms

Plans#26 package unpainted $428.24 + $22.50 S&H

Plans#26 package painted $491.84 + $22.50 S&H

Plans #27 package - 3 parts total

consisting of:

1 Rudder pedal assembly
2 brake pedals

Plans#27 package unpainted $303.16
+ $22.50 S&H

Plans#27 package painted $337.08
+ $22.50 S&H

Plans #28 package - 3 parts total

consisting of:

1 Flap handle
1 T7 tube that goes inside handle

1 Aluminum
flap guide

Plans#28 package unpainted $201.40 + $15 S&H

Plans#28 package painted $230.02 + $15 S&H



Front Seats frames(2)

Front seats unpainted $340.26 + $22.50 S&H

Front seats painted $377.36 + $22.50

Rear Seat frame

Rear seat unpainted $212 + $55 S&H

Rear seat
painted $238.50 + $55 S&H

Fuel Tanks sets

Main tanks (25 gal each) 2 (1L & 1R)

Main fuel tanks $814 a pair + $65 S & H

No picture available

Aux tanks (11 gal) 2 (1L & 1R)

Aux tanks $621.50 a pair + $45 S&H




Windshield - Standard Cessna 170
(requires trimming to fit Bearhawk) 3/16" thick

All windshields are drop shipped directly
from LPAero Plastics. Shipping and handling are normally $130 -

Note 2: For information about the new UVB blocking windshields -
download this pdf.

p/n LP-312.187BHCL clear - $377.36

p/n LP-312.187BHGT green tint - $468.52

p/n LP-312.187BHSG solar gray tint - $458.98

p/n LP-312.187BH UV-GT UV Blocking green tint - $551.20

p/n LP-312.187BH UV-SG UV Blocking solar gray tint - $551.20

No picture

Windshield - Bearhawk
(minor or no trimming required) 3/16" thick

All windshields are drop shipped directly
from LPAero Plastics. Shipping and handling are normally $90 -

Note 2: For information about the new UVB blocking windshields -
download this pdf.

p/n LP-1663CL Clear - $377.36

p/n LP-1663GT green tint - $447.32

p/n LP-1663SG solar gray tint - $447.32

p/n LP-1663UV-GT UV Blocking Green Tint - $551.20

p/n LP-1663UV-SG UV Blocking Solar Gray Tint - $551.20

No picture available

Bearhawk wing strut ends. Four required. Two upper (strut to wing) and two lower (strut to fuselage). Milled from 2024T351.

Wing strut ends (4) $169.60 /set + $10 S&H

Bearhawk fuel line gascolator made from 6061T6 aluminum, minimum internal port size 5/16 inch diameter. Max operating pressure 150 psi. 2 1/2 inch diameter with 3 inch height.
inlet and outlet are 1/4 NTP. 1/8 NPT for quick drain on bottom of bowl. Comes with extra O-ring set. Free shipping if you send BH plans number with order.

Gascolator Assembly $83.21

Fuel cap

Includes all viton O-rings & nylon

Fuel cap
assemblies $78/ pair + $10 S&H

Gerdes short shaft brake master cylinders with special clevis end of
7075T6 which allows for max adjustment of length. Now overhauled w/all
new orings and polished bore and shaft.

Gerdes master cylinders
$140.00/pair + $10 S&H

Tail wheel springs with U-clamp

Tail wheel
spring set $137.80 + $14 S&H

Bearhawk/Patrol/LSA tailwheel assemblies.
Complete with wheel, Aero Classic tire and tube. Available in 8", 10", or Tundra for either
the Patrol or LSA (mount for Tapered Rod Spring) or Bearhawk (mount for 1 1/2" Leaf Spring)

Available at

Wing strut tie down rings

Tie down ring set $21.20 pair + $4 S&H

Bearhawk aileron bellcrank bearings - 4 required

Price $8.48 each + $5.20 S&H

Continental Motor Mounts

Continental O-470 bed mount

Cont. O-470 motor mount painted
$847.21 + $35 S&H

No picture

Lycoming Motor Mounts

Type I Dynafocal Engines have a 1 3/8" opening in the
mount adapters for the rubber isolators.
Type II
Dynafocal Engines have a 2' opening in the mount adapters for the rubber

Lyc O-540 Type I dynafocal

Lyc. O-540 Type I motor mount painted
$673.00 + $35 S&H

Lyc O-540 Type II dynafocal

Lyc. O-540 Type ll motor mount painted
$673.00 + $35 S&H

No picture

Lyc O-360 Type I dynafocal

Lyc. O-360 Type l motor mount painted
$673.00 + $40 S&H

Trim Wheel
1/4" Aluminum w/ 9 tooth sprocket installed

Trim wheel - $42.40 + $7.50 S&H

Trim Wheel
with 14 inches of no.25 trim chain

Trim wheel - $50.88 + $7.50 S&H

Aileron/Flap hinge rod ends
Rod end bearings to mount your ailerons & flaps. Ten required for one Bearhawk

Aileron/Flap hinge rod end
The price is $21.20 each. Shipping would be $5.80 for one or the ten required.


MM3 qty 2
GMM-3M-570 qty 8
XAM-7 qty 2
$170.76 + $6 S&H

No picture

XAM-7M Aurora Rod Ends
for shock struts

(2) rod ends - $44.44 + $7.50 S&H

Cable guards for the aileron pulleys in the
wings. Four pieces. All are
drilled for 5/16"
hole pulleys.

Cable guards set -$39.75 including S&H.

Rear Seat attachment bolts
Two AN eye bolts (with bushings) for the rear seat attachment per Bob Barrows recommendation.
For rear set of attach bolts only. Not needed for front set.

Rear Seat attachment bolts
- $12.72 (shipping included)

Tail Rib Package:

All rudder, Vstab, Elevator, and Hstab ribs
bent to
spec and left long for fitting/welding.
Tail Rib
Package - $296.80 + $15 S&H

No picture

Rib / Spar Web Package

This package consists of all wing ribs, aileron ribs,
flap ribs, and false ribs. Ribs are professionally hydroformed with
lightening holes cut and flanged. The ribs will still need to be
straightened and have the vertical stiffener angles installed. Included
are all .032 spar webs for the main spars, rear spars, false spars,
aileron spars, and flap spars. Also included are all the aluminum parts
that need to be bent on an 8ft. brake. These consist of the wing trailing
edge skin stiffeners in the flap area (4 pieces ) and the aileron/flap
trailing edges ( 4 pieces ).

Note: This package eliminates one of the harder tasks
for the scratch builder - finding an 8ft. brake and bending the spar webs
to match your ribs.

Rib / Spar Web Package - $3500 + $175 S&H

Ribs alone

All other ribs mentioned above except the four false ribs.

Ribs alone - $2120 + $45 S&H

No picture

Spar webs alone -

Spar webs alone - $1378 + $130 S&H

No picture

Bearhawk Aircraft now offers a tubing package for the basic fuselage.
All tubes are full length(per plans), all bent to shape, and with all tube
ends notched or "fishmouthed" to fit together. We assemble this package in
our fuselage tooling, then remove the tubing, label each tube as to its
correct location, and pack into a long cardboard tube for shipping.

4-Place BH Tubing Package - $3300 + Please contact for shipping cost before ordering

No picture